top of page

Listing is: One Peony flower mold (N2)

The approximate Finished product (soap) size:
Diameter: 6 cm/ 2.36 inches 
Height: 4.8 cm/ 1.89 inches 
Weight: 31 gram / 1.09 ounce

 

The approximate Mold size:
Diameter: 7.4 cm/ 2.91 inches 
Height: 5.2 cm/ 2.05 inches 
Weight: 204 gram / 7.20 ounce

 

Mold material: High quality Platinum Silicone (EU) , hardness: 13 shA ± 2 shA

Peony mold (N2) - silicone mold - for soap making - soap mould

€16.00Price
Made to order within 7-10 working days after receiving the payment
  • It's a Complex mold. The mold contains delicate elements that can be difficult to spill.
    If the material with which you are working is fragile (for example, wax), thin elements can break while removing the finished product from the mold.
    In case if you had problems removing the finished product from the mold, we can recommend you the following:
    - since platinum silicone is flexible enough, the mold can be completely turned inside out;
    - you can make additional cuts on the mold in those places where the product is difficult to extract;
    - try to get the product out before it hardens completely and still retains its plasticity.

    Before buying, please carefully evaluate the possibility of using our form in the work of the material you have chosen.

    All molds are tested with soap, and are 100% suitable for use!

    In our production we used platinum silicone, which is non-toxic, but according to EU standards these silicones are not listed as edible silicones. Our molds are not intended for use in the food industry.
    It is not considered to be dangerous according to Directive 88/379 / EEC and its amendments.
    Silicone rating of temperature: -40°C; +200°C, without loosing flexibility

    3D Silicone mold of perfect quality, our 3D molds have sections with the slots for easy colored pouring. High durability and flexibility. Easy to use. Easy to clean.

    All our molds are made via a vacuum, they have no bubbles, flexible, durable, odorless.

    Some molds could have incisions. If the mold has incisions, this is not a defect. Incisions are required so that you can get the product out of the mold (soap, candle ect.).

    If you plan to use our molds for resin casting, please be aware that there may be polyurethane resin that are not entirely compatible with platinum-based silicones.
    If you plan to use our molds for epoxy resin castings, then you have to take into account that the mold will not serve as many castings as for casting soap, gypsum materials, candles and etc. non-agressive materials.

Best Sellers

bottom of page